Aficio MP 2352 - Page 2272

Problem Causes Solutions
Images smudge when
rubbed. (Toner is not fixed.)
The specified paper type
and the paper that is
actually loaded might be
different. For example, thick
paper might be loaded but
not specified as the paper
type.
PCL 5e
On the printer driver's [Paper]
tab, select a proper paper type in
the "Type:" list.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Paper] in the
"Menu:", and then select a proper
paper type in the "Paper Type:"
list.
PostScript 3
On the printer driver's [Detailed
Settings] tab, click [Paper] in the
"Menu:", and then select a proper
paper type in the "Paper Type:"
list.
The printed image is different
from the image on the
computer's display.
Printing will be performed by
the machine's graphic
processing function.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in the "Menu:", and then select
[Raster] in the "Vector/Raster:"
list.
When printing graphics, the
output and the screen are
different.
If the printer driver is
configured to use the
graphics command, the
graphics command from the
machine is used to print.
If you want to print accurately, set the
printer driver to print without using the
graphics command. See the printer
driver Help.
Lines of garbled or
unwanted alphanumeric
characters appear.
An incorrect printer
language might have been
selected.
Select the correct printer driver, and
then print the file again.
Images are cut off, or excess
is printed.
You may be using paper
smaller than the size
selected in the application.
Use the same size paper as that
selected in the application. If you
cannot load paper of the correct size,
use the reduction function to reduce the
image, and then print. See the printer
driver Help.
Other Printing Problems
91
4