• To print via IPP-SSL under Windows Vista/7 or Windows Server 2008/2008 R2, you must install
the device certificate on your computer before you install the printer driver using the IPP port. For
details, consult your administrator.
Installing the PCL printer driver
1. Quit all applications currently running.
2. On the [Start] menu, click [Printers and Faxes].
3. Click [Add a printer].
The [Add Printer Wizard] dialog box appears.
4. Click [Next>].
5. Click [A network printer, or a printer attached to another computer].
6. Click [Next>].
7. Click [Connect to a printer on the Internet or on a home or official network:].
8. In the [URL:] box, enter "http://(machine's IP address)/printer (or ipp)" as the machine's
address, and then click [Next>].
9. Click [Have Disk...].
10. Insert the provided CD-ROM into the computer's CD-ROM drive.
If Auto Run starts, click [Cancel] and then [Exit].
11. Click [Browse...], and then specify a location for the INF file.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
•
PCL 5e
• 32bit-driver
D:\X86\DRIVERS\PCL5E\XP_VISTA\(language)\DISK1
• 64bit-driver
D:\X64\DRIVERS\PCL5E\X64\(language)\DISK1
• PCL 6
• 32bit-driver
D:\X86\DRIVERS\PCL6\XP_VISTA\MUI\DISK1
• 64bit-driver
D:\X64\DRIVERS\PCL6\X64\MUI\DISK1
The PCL 6 printer driver is installed in the language specified by your operating system.
12. Click [Open].
13. Click [OK] to close the Install From Disk window.
Installing the Printer Driver for the Selected Port
23
To Next Page
Loading...
