4. Click [Devices and Printers] from the [Start] menu.
[Devices and Printers] window appears.
5. In [Unspecified], double-click the name of the machine whose driver you want to install.
6. Click the [Hardware] tab in the printer properties dialog box.
7. Select the name of the machine whose driver you want to install, and then click
[Properties].
8. Click [Change settings].
9. Click the [Driver] tab.
10. Insert the CD-ROM into the CD-ROM drive.
If the [AutoPlay] dialog box appears, click the [Close] button.
11. Click [Update Driver...].
12. Click [Browse my computer for driver software].
13. Click [Browse] to select the printer driver location.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
•
PCL 5e
• 32bit-driver
D:\X86\DRIVERS\PCL5E\XP_VISTA\(language)\DISK1
• 64bit-driver
D:\X64\DRIVERS\PCL5E\X64\(language)\DISK1
• PCL 6
• 32bit-driver
D:\X86\DRIVERS\PCL6\XP_VISTA\MUI\DISK1
• 64bit-driver
D:\X64\DRIVERS\PCL6\X64\MUI\DISK1
The PCL 6 printer driver is installed in the language specified by your operating system.
14. Click [Next].
If [Windows can't verify the publisher of this software] display appears in the installation, click
[Install this driver software anyway].
15. Click [Close].
If installation is successful, the icon of the machine connected to the "USB001" port is added to the
[Devices and Printers] window.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
Installing the Printer Driver Using USB
41
To Next Page
Loading...
