Paper Size Staple Capacity
A3 , A4 , B4 JIS , B5 JIS , 11 17 ,
8
1
/
2
14 , 8
1
/
2
11
10
Mixed Size
You can mix two different paper sizes to staple if the width of the paper is the same.
Booklet stapling is unavailable for mixed size paper.
Mixed Paper Size 1000-sheet finisher Booklet finisher
Internal finisher/500-
sheet finisher
A3
and A4 16 22 30
B4 JIS and B5 JIS 16 22 30
11 17 and 8
1
/
2
11
16 22 30
Conditions where stapling will be canceled.
Under the following conditions, collate will continue if it was specified along with the staple
function.
•
If paper sizes which can not mix together are contained in a single job.
• If the number of pages to staple exceeds the maximum.
• If a paper size that cannot be stapled is selected.
• If a paper type that cannot be stapled is selected.
• When the setting does not meet collating requirements.
• When the record area for collate overflows during the job.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in duplex mode and the staple position.
• If there are inconsistencies between the orientation in letterhead mode and the staple position.
• When paper is loaded using the bypass tray.
• When only 1 page is printed.
• If an event occurs that forces the machine to print an error report.
• If a tray specified as [Driver / Command] under [Tray Setting Priority] is selected.
• When the stapling is canceled, "Staple has been cancelled." appears.
Advanced Printing
81
To Next Page
Loading...
