The number of characters per inch can be specified from 0.44 to 99.99 by increments of 0.01.
This setting is effective only with fixed-space fonts.
Default: "10.00" pitches
Symbol Set
You can specify the character set of the selected font. The available options are as follows:
•
Roman-8, Roman-9, ISO L1, ISO L2, ISO L5, ISO L6, ISO L9, PC-775, PC-8, PC-8 D/N,
PC-850, PC-852, PC-858, PC8-TK, PC-1004, Win L1, Win L2, Win L5, Win Baltic,
Desktop, PS Text, MS Publ, Math-8, PS Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15,
ISO 17, ISO 21, ISO 60, ISO 69, Win 3.0, MC Text, UCS-2, PC-864, Arabic-8, WIN
Arabic, PC-866, PC-866U, ISO Cyrillic, WIN Cyrillic, PC-851, Greek-8, ISO Greek, PC-8
Greek, WIN Greek, PC-862, Hebrew-7, Hebrew-8, ISO Hebrew
Default: [PC-8]
Courier Font
You can select a courier font type.
Default: [Regular]
Extend A4 Width
You can extend the printing area width (when printing on A4 sheet with PCL).
Default: [Off]
When the setting is [On], the width will be 8
1
/
2
inches.
Append CR to LF
When set to [On], a carriage return will follow each line feed: CR=CR, LF=CR-LF, FF=CR-FF.
Default: [Off]
Resolution
You can set the print resolution in dots per inch.
Default: [600 dpi (Fast)]
• To change default settings, see "Accessing User Tools".
• p.147 "Accessing User Tools"
PCL Menu
159
To Next Page
Loading...
