When not using a gatekeeper/SIP server
•
From IP-Fax to IP-Fax
Specify the IP address or host name of the receiving machine.
Example: 192.168.1.10 (IP address)
Example: IPFAX1 (host name)
• From IP-Fax to G3 fax
Specify the G3 fax telephone number of the receiving machine.
Example: 0312345678
When using a gatekeeper server
• From IP-Fax to IP-Fax
Specify the alias telephone number of the receiving machine.
Example: 0311119999 (alias telephone number)
• From IP-Fax to G3 fax
Specify the G3 fax telephone number of the receiving machine.
Example: 0312345678
When using a SIP server
• From IP-Fax to IP-Fax
Specify the SIP user name of the receiving machine.
Example: ABC (SIP user name)
• From IP-Fax to G3 fax
Specify the G3 fax telephone number of the receiving machine.
Example: 0312345678
• To send to a G3 fax via a gateway connected to a public telephone line, you must specify it's the
receiver's machine telephone number. For example, if the receiver's fax number is
“0312345678”, specify “5678”. To send from an IP-Fax to G3 fax without using gatekeeper or
SIP server, you must register the gateway also.
•
An alias telephone number is a number that is registered in the gatekeeper, and is available only in
the network to which the gatekeeper is connected.
• Pay attention to the number of telephone number digits set in the gateway/IP address conversion
table to avoid transmission error.
• SIP allows you to transmit and receive documents via an IPv6 network. This machine does not
support H.323 over IPv6.
• Although the machine can have multiple IP addresses in an IPv6 environment, only one address
can receive IP-Faxes.
1. Transmission
94
To Next Page
Loading...
