Aficio MP 2352 - Page 1443

To Next Page

To Previous Page

• [Do not Display], [Recycled Paper], [Colour Paper], [Letterhead], [Preprinted Paper], [Bond

Paper], [Cardstock], [Prepunched Paper], [Thick Paper], [Middle Thick], [Thin Paper],

[Special Paper]

The paper thicknesses you can set for the paper tray 3 are as follows:

•

[Thin Paper] (52 - 59 g/m

, 14 - 15 lb.Bond)

• [Plain Paper] (60 - 81 g/m

, 16 - 20 lb.Bond)

• [Middle Thick] (82 - 105 g/m

, 21 - 28 lb.Bond)

• [Thick Paper] (106 - 157 g/m

, 28 lb. Bond - 42 lb. Index)

Default for "Paper Type": [Do not Display]

Default for "Paper Thickness": [Plain Paper]

Default for "Apply Duplex": [Yes]

Default for "Apply Auto Paper Select": [No]

The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".

Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and

[Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid.

For details about the relations between possible paper sizes and thickness, see "Recommended

Paper Sizes and Types", About This Machine.

For details about the recommended conditions for using thick paper, see "Thick Paper", About This

Machine.

Paper Type: Tray 3 (when the lower paper tray is installed.)

Sets the display so you can see what type of paper is loaded in the paper tray 3.

The print function uses this information to automatically select the paper tray.

The paper types you can set for the paper tray 3 are as follows: