The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Apply Auto Paper Select can only be selected for the copier function if [Do not Display] and
[Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid.
For details about the relations between possible paper sizes and thickness, see "Recommended
Paper Sizes and Types", About This Machine.
For details about the recommended conditions for using thick paper, see "Thick Paper", About This
Machine.
Cover Sheet Tray
You can specify and display the paper tray that is used to set front cover sheets.
After selecting the paper tray, you can also specify the display timing and copy method for two-
sided copying.
Default: [Off]
When [At Mode Selected] is selected, front cover sheet tray settings only appear when the cover
function or slip sheet function is selected.
When [Full Time] is selected, the front cover sheet tray is always displayed.
Slip Sheet Tray
You can specify and display the paper tray that is used for setting slip sheets.
You can also specify the display timing and copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, slip sheet tray settings only appear when the cover function
or slip sheet function is selected.
When [Full Time] is selected, the slip sheet tray is always displayed.
• The paper types you can set for this machine are [Plain Paper 1] and [Plain Paper 2]. The default
setting is [Plain Paper 2]. For details about setting the paper type, see "Changing Paper Thickness
Settings", About This machine.
•
The settings configured pressing [Thin Paper] ([Middle Thick] or [Thick Paper]) in "Paper Type" and
those configured pressing both [Do not Display] in "Paper Type" and [Thin Paper] ([Middle Thick]
or [Thick Paper]) in "Paper Thickness" will be the same. Also, [Thin Paper] ([Middle Thick] or [Thick
Paper]) will be displayed on the initial screen of the copier or printer.
• If you configure the paper settings after selecting [Thin Paper] ([Middle Thick] or [Thick Paper]) in
"Paper Type", [Do not Display] in "Paper Type" and [Thin Paper] ([Middle Thick] or [Thick Paper])
in "Paper Thickness" will be displayed.
• For details on how to access System Settings, see "Accessing User Tools".
• p.18 "Accessing User Tools"
Tray Paper Settings
31
To Next Page
Loading...
