Aficio MP 2352 - Page 1602

Parameter Value configured
eap {tls|ttls|leap|peap} {chap|mschap|
mschapv2|pap|md5|tls}
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, and tls
are settings for the phase 2 method, and one
of these must be specified if EAP-TTLS or PEAP
is selected.
Do not make these settings when using other
EAP authentication types.
If you select EAP-TTLS, you can select chap,
mschap, mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or
tls.
username "character string" You can specify the login user name for the
Radius server.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
username2 "character string" You can specify the phase 2 username for
EAP-TTLS/PEAP phase 2 authentication.
Usable characters: ASCII 0x20-0x7e (31
bytes).
The default is blank.
domain "character string" You can specify the login domain name for the
Radius server.
The characters you can enter are ASCII
0x20-0x7e (31 bytes), but not "@" or "\".
The default is blank.
password "character string" You can specify the login for the Radius server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
Remote Maintenance Using telnet
189
4