Aficio MP 2352 - Page 1601

Parameter Value configured
wepauth {open|shared} You can set an authorization mode when using
WEP. The specified value and authorized
mode are as follows:
open: open system authorization (default)
shared: shared key authorization
security {none|wep|wpa} You can specify the Security Mode.
none: No encryption (default)
wep: WEP encryption
wpa: WPA encryption
wpaenc {tkip|ccmp} You can specify WPA encryption key when
using WPA encryption.
tkip: TKIP
ccmp: CCMP (AES) (default)
wpaauth {wpapsk|wpa|wpa2psk|wpa2} You can specify the WPA authentication mode
when using WPA encryption.
wpapsk: WPA-PSK authentication (default)
wpa: WPA authentication
wpa2psk: WPA2-PSK authentication
wpa2: WPA2 authentication
psk "character string" You can specify the Pre-Shared key.
Usable characters: ASCII 0x20-0x7e (8 to 63
bytes).
The default is blank.
4. Monitoring and Configuring the Machine
188
4