Message Problem and solutions
child process exec error ! (process name) The network service failed to start. Turn the
machine off and then on. If this does not work,
contact your service or sales representative.
cipher suite mismatch The uni-cast / multi-cast suite (TKIP/AES/WEP)
of the access point is different from the suite used
by the supplicant.
client EAP method rejected The authentication mode of the access point is
different with the authentication mode of the
supplicant.
Use the same authentication mode between the
access point and the supplicant.
client password rejected The client's password was rejected. Check the
client password.
client TLS certificate rejected The client's TLS certificate was rejected. Check the
certificate.
Connected DHCP server (<DHCP server
address>).
The IP address was successfully received from the
DHCP server.
Connected DHCPv6 server <IPv6 address> The IP address was successfully received from the
DHCPv6 server.
connecting The supplicant is establishing the Wireless LAN
connection with the access point.
connection from <IP address> A user logged in from the host <IP address>.
Could not attach to FileServer <error number> Connection to the file server could not be
established when the remote printer went online.
The file server refused the connection for
unknown reason. Check the file server's
configuration.
Could not attach to PServer <print server name> Connection to the print server has not been
established when the remote printer is turned on.
The print server has refused the connection.
Check the print server configuration.
Current Interface Speed: <Ethernet interface
speed>
Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
Message List
211
To Next Page
Loading...
