Message Problem and solutions
SMTPC: no smtp server. connection close. Connection to the SMTP server failed due to no
response from SMTP. This could be because a
server other than the SMTP server has been
specified, or the specified SMTP server port
number is incorrect. Check the SMTP server
name, port number, or the SMTP server port
number.
SMTPC: failed to connect smtp server. Connection to the SMTP server failed. This could
be because no connection to the network has
been established, or the network configuration is
incorrect, so there is no response from the SMTP
server, or the specified SMTP server name is
incorrect, or the specified SMTP server IP address
could not be found in the DNS server, or a server
other than the SMTP server has been specified, or
the specified SMTP server port number is
incorrect. Check the DNS Server's IP address and
SMTP server's IP address, or the SMTP server
name and SMTP port number, or the SMTP
server's SMTP port number, or the network
connection and configuration.
SMTPC: username or password wasn't correct.
[response code] (information)
Connection to the SMTP server failed, because
the specified SMTP user name is incorrect, or the
specified SMTP password is incorrect. Check the
SMTP user name and password.
Snmp over IPv4 is ready. Communication over IPv4 with snmp is available.
Snmp over IPv6 is ready. Communication over IPv6 with snmp is available.
Snmp over IPX is ready. Communication over IPX with snmp is available.
Snmpd Start. The snmpd has started. This message is displayed
only when the power is turned on.
started. The direct printing service has started.
started. The IKE service has started.
Started. The bonjour (rendezvous) function has started.
stopped The supplicant has just stopped.
4. Monitoring and Configuring the Machine
218
To Next Page
Loading...
