Message Problem and solutions
success key received The supplicant received the EAP-Success key.
success but invalid key The supplicant received a message reporting that
EAP authentication was successful, but the EAPOL
key was invalid.
supplicant started The supplicant has just started.
supplicant unbound The supplicant is not connected to the unbound
access point.
terminated. The IKE service has stopped because no
configurations for manual SA or IKE exist.
Terminated. The bonjour (rendezvous) function is disabled.
There is problem in dhcp server operation. There is a problem with the DHCP server.
If multiple DHCP servers are active on the
network, check that they are assigning unique IP
addresses to each machine.
The print server received error <error number>
during attempt to log in to the network. Access to
the network was denied. Verify that the print
server name and password are correct.
Login to the file server failed when the print server
was online. The print server is not registered or a
password is specified. Register the print server
without specifying a password.
trap account is unavailable. v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the machine.
unauthenticated The authentication failed. The supplicant was
denied access to the access point, or was not
authenticated.
Updated (option name)(value) via DHCPv6
Server
The parameter obtained from the DHCP server
has been updated.
usbd is disabled. Plug and Play is unavailable because the
machine is in Security Mode. Enable USBD in
Security Mode.
waiting for keys The supplicant is waiting for the session key.
Message List
219
To Next Page
Loading...
