For details about specifying available functions for individuals or groups, see "Limiting Available
Functions".
7. Select the "Printer Job Authentication" level.
If you select [Entire] or [Simple (All)], proceed to "Selecting Entire or Simple (All)".
If you select [Simple (Limitation)], proceed to "Selecting Simple (Limitation)".
For a description of the printer job authentication levels, see "Printer Job Authentication".
• p.35 "Logging in Using Administrator Authentication"
•
p.36 "Logging out Using Administrator Authentication"
• p.158 "Limiting Available Functions"
• p.48 "Selecting Entire or Simple (All)"
• p.49 "Selecting Simple (Limitation)"
• p.82 "Printer Job Authentication"
Selecting Entire or Simple (All)
If you select [Entire], you cannot print using a printer driver or a device that does not support
authentication. To print under an environment that does not support authentication, select [Simple (All)]
or [Simple (Limitation)].
If you select [Simple (All)], you can print even with unauthenticated printer drivers or devices. Specify
this setting if you want to print with a printer driver or device that cannot be identified by the machine or
if you do not require authentication for printing. However, note that, because the machine does not
require authentication in this case, it may be used by unauthorized users.
1. Press [Entire] or [Simple (All)].
2. Press [OK].
3. Press [Exit].
A confirmation message appears.
3. Configuring User Authentication
48
To Next Page
Loading...
