1. Press [Simple (Limitation)].
2. Press [Change].
3. Specify the range in which [Simple (Limitation)] is applied to "Printer Job Authentication".
You can specify the IPv4 address range to which this setting is applied, and whether or not to apply
the setting to the parallel and USB interfaces.
4. Press [Exit].
5. Select which of the machine's functions you want to permit.
If this item is not visible, press [ Next] to display more settings.
LDAP Authentication will be applied to the selected functions.
Users can use the selected functions only.
LDAP Authentication
73
To Next Page
Loading...
