Status of Functions under Each Network Security Level
Tab Name:TCP/IP
Function Level 0 Level 1 Level 2
TCP/IP Active Active Active
HTTP> Port 80 Open Open Open
IPP> Port 80 Open Open Open
IPP> Port 631 Open Open Close
SSL/TLS> Port 443 Open Open Open
SSL/TLS> Permit SSL/TLS Communication Ciphertext
Priority
Ciphertext
Priority
Ciphertext
Only
DIPRINT Active Active Inactive
LPR Active Active Inactive
FTP Active Active Active
sftp Active Active Active
ssh Active Active Active
RSH/RCP Active Active Inactive
TELNET Active Inactive Inactive
Bonjour Active Active Inactive
SSDP Active Active Inactive
SMB Active Active Inactive
NetBIOS over TCP/IPv4 Active Active Inactive
WSD (Device) Active Active Inactive
WSD (Printer) Active Active Inactive
WSD (Scanner) Active Active Inactive
RHPP Active Active Inactive
The same settings are applied to IPv4 and IPv6.
7. Enhanced Network Security
214