[SSL/TLS version] and [Encryption Strength Setting] under [Network Security] are not affected by
the network security level setting.
Tab Name:NetWare
Function Level 0 Level 1 Level 2
NetWare Active Active Inactive
If NetWare is not used on your network, the above settings are not applicable.
Tab Name:SNMP
Function Level 0 Level 1 Level 2
SNMP Active Active Active
Permit Settings by SNMPv1 and v2 On Off Off
SNMPv1,v2 Function Active Active Inactive
SNMPv3 Function Active Active Active
Permit SNMPv3 Communication
Encryption/
Cleartext
Encryption/
Cleartext
Encryption
Only
Preventing Unauthorized Access
215
To Next Page
Loading...
