Error Code Cause Solution
W0406-101
Authentication cannot be
completed because of the
high number of authentication
attempts.
Wait a few minutes and then
try again.
If the situation does not return
to normal, make sure that an
authentication attack is not
occurring.
Notify the administrator of the
screen message by e-mail,
and check the system log for
signs of an authentication
attack.
W0400-102
Kerberos authentication failed
because the server or security
module is not functioning
correctly.
1. Make sure that the server is
functioning properly.
2. Make sure that the security
module is installed.
W0406-104
1. Cannot connect to the
authentication server.
Make sure that connection to
the authentication server is
possible.
Use the PING Command to
check the connection.
W0406-104
2. A login name or password
error occurred.
Make sure that the user is
registered on the server.
Use a registered login user
name and password.
W0406-104
3. A domain name error
occurred.
Make sure that the Windows
authentication domain name is
specified correctly.
If Authentication Fails
283
To Next Page
Loading...
