5. In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-Z, 0-9)
characters.
The user ID associates the user with his / her jobs.
6. Click [OK].
7. Set the number of copies to two or more in the [Copies:] box, and then click [OK] to close
the [Printing Preferences] dialog box.
If the application has a collate option, make sure it is not selected before sending a print job. The
printer driver automatically collates Sample Print jobs by default. If the collate option is selected in
the application's [Print] dialog box, there may be more prints than required.
8. Start the printing from the application's [Print] dialog box.
The sample print job is sent to the machine, and one set is printed.
9. Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps to print the remaining sets.
If you want to delete saved jobs, see "Deleting Sample Print files".
10. On the machine's control panel, press the [Printer] key to display the printer screen.
11. Press [Print Jobs].
12. Press [Sample Print Job List].
A list of print files stored in the machine appears.
[User ID], [Date / Time] and [File Name] also appear.
Depending on the security settings, certain print jobs may not be displayed.
13. Select the file you want to print by pressing it.
14. Press [Print].
15. Enter the new number of sets using the number keys if necessary, and then press [Yes].
You can enter up to 999 sets.
Press the [Clear/Stop] key to correct any entry mistakes.
When multiple files are selected without setting a quantity, 1 page less than the minimum number of
all settings is applied.
The remaining sets are printed.
Mac OS X
1. In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
2. Set the number of copies to two or more.
The sample print job is sent to the machine, and one set is printed.
3. In the pop-up menu, click [Job Log].
Printing a Document
61
To Next Page
Loading...
