4. On the [Job Type:] pop-up menu, select [Sample Print].
5. In the [User ID:] box, enter a user ID using up to eight alphanumeric (a-z, A-Z, 0-9)
characters.
The user ID associates the user with his / her jobs.
6. After making the necessary settings, click [Print].
7. Check the printed output to make sure the settings are correct.
If the settings are correct, perform the following steps to print the remaining sets.
If you want to delete saved jobs, see "Deleting Sample Print files".
8. On the machine's control panel, press the [Printer] key to display the printer screen.
9. Press [Print Jobs].
10. Press [Sample Print Job List].
A list of print files stored in the machine appears.
[User ID], [Date / Time] and [File Name] also appear.
Depending on the security settings, certain print jobs may not be displayed.
11. Select the file you want to print by pressing it.
12. Press [Print].
13. Enter the new number of sets using the number keys if necessary, and then press [Yes].
You can enter up to 999 sets.
Press the [Clear/Stop] key to correct any entry mistakes.
When multiple files are selected without setting a quantity, 1 page less than the minimum number of
all settings is applied.
The remaining sets are printed.
• To cancel printing, press [Exit]. Then, press [Job Reset]. The file will be deleted.
•
If there is a print job outstanding, this is printed before the sample print job.
• When printing is completed, the stored file is deleted automatically.
• p.62 "Deleting Sample Print files"
Deleting Sample Print files
If the printed document is no longer required, you can delete the Sample Print file.
1. On the machine's control panel, press the [Printer] key to display the printer screen.
2. Press [Print Jobs].
3. Using the PostScript 3 Printer Driver
62
To Next Page
Loading...
