Mac OS X
1. In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
2. In the pop-up menu, click [Job Log].
3. On the [Job Type:] pop-up menu, click [Stored Print] or [Store and Print].
•
Stored Print
Stores the file in the printer and print it later using the control panel.
• Store and Print
Prints the file at once and also stores the file in the machine.
4. In the [User ID:] box, enter the user ID using up to eight alphanumeric (a-z, A-Z, 0-9)
characters. A file name and password can also be entered arbitrarily.
The user ID associates the user with his / her jobs.
You can assign a password to a saved document, but password assignment is not mandatory.
The same password must be entered when printing or deleting.
5. After making the necessary settings, click [Print].
The document file is saved in the machine.
To print the document, perform the following steps.
To delete the documents, see "Deleting Stored Print files".
6. On the machine's control panel, press the [Printer] key to display the printer screen.
7. Press [Print Jobs].
8. Press [Stored Print Job List].
A list of print files stored in the machine appears.
[User ID], [Date / Time] and [File Name] also appear.
Depending on the security settings, certain print jobs may not be displayed.
9. Select the file you want to print by pressing it.
10. Press [Print].
A confirmation screen appears.
If you have already set a password, proceed to the following step.
11. Enter a password using the number keys on the password screen, and then press [OK].
A confirmation screen will appear if the password is not entered correctly. Press [OK] to enter the
password again.
If you have not set the password, proceed to the following step.
3. Using the PostScript 3 Printer Driver
70
To Next Page
Loading...
