12. Enter the new number of sets using the number keys if necessary, and then press [Yes].
You can enter up to 999 sets.
Press the [Clear/Stop] key to correct any entry mistakes.
The stored file is printed.
• To cancel printing, press [Exit]. Then, press [Job Reset]. The file will be deleted.
•
Stored Print file sent to the machine is not deleted unless you delete them in the machine or select
[Auto Delete Stored Print Jobs]. For details about the [Auto Delete Stored Print Jobs] settings, see
"System", Printer Reference. For details about deleting stored files, see "Deleting Stored Print files".
• p.71 "Deleting Stored Print files"
Deleting Stored Print files
If the printed document is no longer required, you can delete the Stored Print files.
1. On the machine's control panel, press the [Printer] key to display the printer screen.
2. Press [Print Jobs].
3. Press [Stored Print Job List].
A list of print files stored in the machine appears.
Depending on the security settings, certain print jobs may not be displayed.
4. Select the file you want to delete by pressing it.
To cancel a selection, press the highlighted job again.
5. Press [Delete].
A confirmation screen appears.
6. Enter a password using the number keys on the password screen, and then press [OK].
A confirmation screen will appear if the password is not entered correctly. Press [OK] to enter the
password again.
If you have not set the password, proceed to the following step.
7. Press [Yes].
The selected file is deleted.
• Press [No] to cancel the delete request.
•
If you have already set a password in the printer driver, enter it to delete.
• If you forgot your password, ask your file administrator for help.
Printing a Document
71
To Next Page
Loading...
