Switching Commands
123
M4100 Series ProSAFE Managed Switches
no port-channel system priority
Use this command to configure the default port-channel system priority value.
show lacp actor
Use this command to display LACP actor attributes.
The interface is a logical <slot/port> for a configured port-channel. The option all
displays the configuration for all the configured port-channels. Instead of <slot/port>, you
can use lag
<lag-group-id> as an alternate way to specify the LAG interface, in which
<lag-group-id> is the LAG port number.
The following output parameters are displayed.
show lacp partner
Use this command to display LACP partner attributes.
The interface is a logical <slot/port> for a configured port-channel. The option all
displays the configuration for all the configured port-channels. Instead of <slot/port>, you
can use lag
<lag-group-id> as an alternate way to specify the LAG interface, in which
<lag-group-id> is the LAG port number.
Format no port-channel system priority
Mode Global Config
Format show lacp actor {<slot/port> | lag <lag-group-id> | all}
Mode Global Config
Term Description
System Priority The system priority assigned to the Aggregation Port.
Admin Key The administrative value of the Key.
Port Priority The priority value assigned to the Aggregation Port.
Admin State The administrative values of the actor state as transmitted by the Actor in LACPDUs.
Format show lacp partner {<slot/port> | lag <lag-group-id> | all}
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General
