Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Utility Commands

368

M4100 Series ProSAFE Managed Switches

clear counters

This command clears the statistics for a specified <slot/port>, for all the ports, or for the

entire switch based upon the argument.

clear igmpsnooping

This command clears the tables managed by the IGMP Snooping function and attempts to

delete these entries from the Multicast Forwarding Database.

clear pass

This command resets all user passwords to the factory defaults without powering off the

switch. You are prompted to confirm that the password reset should proceed.

clear port-channel

This command clears all port-channels (LAGs).

clear traplog

This command clears the trap log.

clear vlan

This command resets VLAN configuration parameters to the factory defaults.

Format clear counters {<slot/port> | all}

Mode Privileged EXEC

Format clear igmpsnooping

Mode Privileged EXEC

Format clear pass

Mode Privileged EXEC

Format clear port-channel

Mode Privileged EXEC

Format clear traplog

Mode Privileged EXEC

Format clear vlan

Mode Privileged EXEC

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General