Routing Commands
254
M4100 Series ProSAFE Managed Switches
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
• Privileged EXEC
• User EXEC
IP Helper Commands
This section describes the commands to configure a DHCP relay agent with multiple DHCP
server addresses per routing interface, and to use different server addresses for client
packets arriving on different interfaces on the relay agent.
clear ip helper statistics
Use this command to reset the statistics displayed in the show ip helper statistics
command to zero.
Format show bootpdhcprelay
Modes
Term Definition
Maximum Hop
Count
The maximum allowable relay agent hops.
Minimum Wait
Time (Seconds)
The minimum wait time.
Admin Mode Indicates whether relaying of requests is enabled or disabled.
Server IP
Address
The IP address for the BootP/DHCP Relay server.
Circuit Id Option
Mode
The DHCP circuit Id option which might be enabled or disabled.
Requests
Received
The number or requests received.
Requests
Relayed
The number of requests relayed.
Packets
Discarded
The number of packets discarded.
Format clear ip helper statistics
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General
