Switching Commands
194
M4100 Series ProSAFE Managed Switches
no lldp med faststartrepeatcount
Use this command to return to the factory default value.
lldp med transmit-tlv all
Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED
set will be transmitted in the Link Layer Discovery Protocol Data Units (LLDPDUs).
no lldp med transmit-tlv
Use this command to remove a TLV.
show lldp med
Use this command to display a summary of the current LLDP MED configuration.
Format no lldp med faststartrepeatcount
Mode Global Config
Default By default, the capabilities and network policy TLVs are included.
Format lldp med transmit-tlv all [capabilities] [ex-pd] [ex-pse]
[inventory] [location] [network-policy]
Mode Global Config
Parameter Definition
capabilities Transmit the LLDP capabilities TLV.
ex-pd Transmit the LLDP extended PD TLV.
ex-pse Transmit the LLDP extended PSE TLV.
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.
Format no lldp med transmit-tlv all [capabilities] [network-policy]
[ex-pse] [ex-pd] [location] [inventory]
Mode Global Config
Format show lldp med
Mode Privileged Exec
To Next Page
Loading...
Need help?
General
