Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Switching Commands

M4100 Series ProSAFE Managed Switches

show vlan association subnet

This command displays the VLAN associated with a specific configured IP-Address and net

mask. If no IP address and net mask are specified, the VLAN associations of all the

configured IP-subnets are displayed.

show vlan association mac

This command displays the VLAN associated with a specific configured MAC address. If no

MAC address is specified, the VLAN associations of all the configured MAC addresses are

displayed.

Term Definition

Interface Valid slot and port number separated by forward slashes. It is possible to set the

parameters for all ports by using the selectors on the top line.

Port VLAN ID The VLAN ID that this port will assign to untagged frames or priority tagged frames

received on this port. The value must be for an existing VLAN. The factory default is 1.

Acceptable

Frame Types

The types of frames that may be received on this port. The options are 'VLAN only' and

'Admit All'. When set to 'VLAN only', untagged frames or priority tagged frames received

on this port are discarded. When set to 'Admit All', untagged frames or priority tagged

frames received on this port are accepted and assigned the value of the Port VLAN ID for

this port. With either option, VLAN tagged frames are forwarded in accordance to the

802.1Q VLAN specification.

Ingress Filtering May be enabled or disabled. When enabled, the frame is discarded if this port is not a

member of the VLAN with which this frame is associated. In a tagged frame, the VLAN is

identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID

specified for the port that received this frame. When disabled, all frames are forwarded in

accordance with the 802.1Q VLAN bridge specification. The factory default is disabled.

GVRP May be enabled or disabled.

Default Priority The 802.1p priority assigned to tagged packets arriving on the port.

Format show vlan association subnet [<ipaddr> <netmask>]

Mode Privileged EXEC

Term Definition

IP Subnet The IP address assigned to each interface.

IP Mask The subnet mask.

VLAN ID A VLAN Identifier (VID) is associated with each VLAN.

Format show vlan association mac [<macaddr>]

Mode Privileged EXEC

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General