NETGEAR M4100 Series ProSAFE

Management Commands
487
M4100 Series ProSAFE Managed Switches
no aaa authorization
This command deletes the authorization method list.
authorization (console/Telnet/SSH)
To apply the command authorization method list to an access method (console/Telnet/SSH).
Apply this command in the line configuration mode.
• Line console
• Line telnet
• Line SSH
no authorization (console/Telnet/SSH)
This command is used to remove command authorization from a line configuration mode.
• Line console
• Line telnet
• Line SSH
show authorization methods
This command displays the configured authorization method lists.
Command example:
(NETGEAR Switch) #show authorization methods
Command Authorization List Method
---------------------------- ------------------------------
dfltCmdAuthList none undefined undefined undefined
Line Command Method List
--------- ---------------------
Console dfltCmdAuthList
Telnet dfltCmdAuthList
SSH dfltCmdAuthList
Format no aaa authorization {exec | commands} {default | <list-name>}
<method1> [<method2>…]
Mode Global Config
Format authorization {commands | exec} {default | <list-name>}
Mode
Format no authorization {commands| exec}
Mode
Format show authorization methods
Mode
Privileged EXEC