Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Utility Commands

354

M4100 Series ProSAFE Managed Switches

logging cli-command

This command enables the CLI command logging feature, which enables logging of all CLI

commands issued on the system.

no logging cli-command

This command disables the CLI command Logging feature.

logging console

This command enables logging to the console. You can specify the <severitylevel>

value as either an integer from 0 to 7 or symbolically through one of the following keywords:

emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6),

or debug (7).

no logging console

This command disables logging to the console.

logging host

This command enables logging to a host. You can configure up to eight hosts.

• port—514

• level—critical (2)

Default enabled

Format logging cli-command

Mode

Global Config

Format no logging cli-command

Mode Global Config

Default disabled; critical when enabled

Format logging console [<severitylevel>]

Mode Global Config

Format no logging console

Mode Global Config

Default

Format logging host {<ipaddress> | <hostname>} <addresstype> {<port-number>

<severitylevel>}

Mode

Global Config

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General