Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Switching Commands

M4100 Series ProSAFE Managed Switches

show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree

instance. The <vlanid> corresponds to an existing VLAN ID.

• Privileged EXEC

• User EXEC

VLAN Commands

This section describes the commands you use to configure VLAN settings.

vlan database

This command gives you access to the VLAN Config mode, which allows you to configure

VLAN characteristics.

network mgmt_vlan

This command configures the Management VLAN ID.

no network mgmt_vlan

This command sets the Management VLAN ID to the default.

Format show spanning-tree vlan <vlanid>

Mode

Term Definition

VLAN Identifier The VLANs associated with the selected MST instance.

Associated

Instance

Identifier for the associated multiple spanning tree instance or “CST” if associated with

the Common and Internal Spanning Tree.

Format vlan database

Mode Privileged EXEC

Default 1

Format network mgmt_vlan <1-4093>

Mode Privileged EXEC

Format no network mgmt_vlan

Mode Privileged EXEC

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General