Switching Commands
191
M4100 Series ProSAFE Managed Switches
LLDP-MED Commands
Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057)
provides an extension to the LLDP standard. Specifically, LLDP-MED provides extensions for
network configuration and policy, device location, Power over Ethernet (PoE) management
and inventory management.
lldp med
Use this command to enable MED. By enabling MED, you will be effectively enabling the
transmit and receive function of LLDP.
no lldp med
Use this command to disable MED.
System
Description
Describes the local system by identifying the system name and versions of hardware,
operating system, and networking software supported in the device.
Port Description Describes the port in an alpha-numeric format.
System
Capabilities
Supported
Indicates the primary function(s) of the device.
System
Capabilities
Enabled
Shows which of the supported system capabilities are enabled.
Management
Address
The type of address and the specific address the local LLDP agent uses to send and
receive information.
Default enabled
Format lldp med
Mode Interface Config
Format no lldp med
Mode Interface Config
Term Definition
To Next Page
Loading...
Need help?
General
