Switching Commands
67
M4100 Series ProSAFE Managed Switches
show voice vlan
When the interface parameter is not specified, only the global mode of the Voice VLAN is
displayed.
When the interface is specified:
Provisioning (IEEE 802.1p) Commands
This section describes the commands you use to configure provisioning, which allows you to
prioritize ports.
vlan port priority all
This command configures the port priority assigned for untagged packets for all ports
presently plugged into the device. The range for the priority is 0-7. Any subsequent per port
configuration will override this configuration setting.
Format show voice vlan [interface {<slot/port> | all}]
Mode Privileged EXEC
Term Definition
Administrative
Mode
The Global Voice VLAN mode.
Term Definition
Voice VLAN Interface Mode The admin mode of the Voice VLAN on the interface.
Voice VLAN ID The Voice VLAN ID
Voice VLAN Priority The do1p priority for the Voice VLAN on the port.
Voice VLAN Untagged The tagging option for the Voice VLAN traffic.
Voice VLAN CoS Override The Override option for the voice traffic arriving on the port.
Voice VLAN Status The operational status of Voice VLAN on the port.
Format vlan port priority all <priority>
Mode Global Config
To Next Page
Loading...
Need help?
General
