NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
76
M4100 Series ProSAFE Managed Switches
show garp
This command displays GARP information.
• Privileged EXEC
• User EXEC
GVRP Commands
This section describes the commands you use to configure and view GARP VLAN
Registration Protocol (GVRP) information. GVRP-enabled switches exchange VLAN
configuration information, which allows GVRP to provide dynamic VLAN creation on trunk
ports and automatic VLAN pruning.
Note: If GVRP is disabled, the system does not forward GVRP messages.
set gvrp adminmode
This command enables GVRP on the system.
no set gvrp adminmode
This command disables GVRP.
Format show garp
Mode
Term Definition
GMRP Admin Mode The administrative mode of GARP Multicast Registration Protocol (GMRP) for the
system.
GVRP Admin Mode The administrative mode of GARP VLAN Registration Protocol (GVRP) for the
system.
Default disabled
Format set gvrp adminmode
Mode Privileged EXEC
Format no set gvrp adminmode
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)