Management Commands
467
M4100 Series ProSAFE Managed Switches
Access Commands
Use the commands in this section to close remote connections or to view information about
connections to the system.
disconnect
Use the disconnect command to close HTTP, HTTPS, Telnet, or SSH sessions. Use all
to close all active sessions, or use <session-id> to specify the session ID to close. To
view the possible values for <session-id>, use the show loginsession command.
show loginsession
Use this command to display current Telnet and serial port connections to the switch.
Secure Port The secure HTTP server port number.
Secure Protocol Level(s) The protocol level might have the values of SSL3, TSL1, or both SSL3 and
TSL1.
Maximum Allowable HTTPS
Sessions
The number of allowable secure http sessions.
HTTPS Session Hard
Timeout
The hard time-out for secure http sessions in hours.
HTTPS Session Soft
Timeout
The soft time-out for secure http sessions in minutes.
Certificate Present Indicates whether the secure-server certificate files are present on the device.
Certificate Generation in
Progress
Indicates whether certificate generation is currently in progress.
Format disconnect {<session_id> | all}
Mode Privileged EXEC
Format show loginsession
Mode Privileged EXEC
Field Definition
ID Login Session ID.
User Name The name the user entered to log on to the system.
Connection From IP address of the remote client machine or EIA-232 for the serial port connection.
Idle Time Time this session has been idle.
Term Definition
To Next Page
Loading...
Need help?
General
