NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
209
M4100 Series ProSAFE Managed Switches
dos-control icmpv4
This command enables Maximum ICMPv4 Packet Size Denial of Service protections. If the
mode is enabled, Denial of Service prevention is active for this type of attack. If ICMPv4 Echo
Request (PING) packets ingress having a size greater than the configured value, the packets
will be dropped if the mode is enabled.
no dos-control icmpv4
This command disables Maximum ICMP Packet Size Denial of Service protections.
dos-control icmpv6
This command enables Maximum ICMPv6 Packet Size Denial of Service protections. If the
mode is enabled, Denial of Service prevention is active for this type of attack. If ICMPv6 Echo
Request (PING) packets ingress having a size greater than the configured value, the packets
will be dropped if the mode is enabled.
no dos-control icmpv6
This command disables Maximum ICMP Packet Size Denial of Service protections.
dos-control icmpfrag
This command enables ICMP Fragment Denial of Service protection. If the mode is enabled,
Denial of Service prevention is active for this type of attack. If packets ingress having
fragmented ICMP packets, the packets will be dropped if the mode is enabled.
Default disabled <512>
Format dos-control icmpv4 <0-16384>
Mode Global Config
Format no dos-control icmpv4
Mode Global Config
Default disabled <512>
Format dos-control icmpv6 <0-16384>
Mode Global Config
Format no dos-control icmpv6
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)