Multicast VLAN Registration Commands
221
M4100 Series ProSAFE Managed Switches
no mvr group
This command removes the MVR membership group.
mvr mode
This command changes the MVR mode type. If the mode is set to compatible, the switch
does not learn multicast groups; they need to be configured by the operator as the protocol
does not forward joins from the hosts to the router. To operate in this mode, the IGMP router
needs to be statically configured to transmit all required multicast streams to the MVR switch.
If the mode is set to dynamic, the switch learns existing multicast groups by snooping the
IGMP queries from router on source ports and forwarding the IGMP joins from the hosts to
the IGMP router on the multicast VLAN (with appropriate translation of the VLAN ID).
no mvr mode
This command sets the mode type to the default value.
mvr querytime
This command sets the MVR query response time.
no mvr querytime
This command sets the MVR query response time to the default value.
Format no mvr group <A.B.C.D> [count]
Mode Global Config
Default compatible
Format mvr mode {compatible | dynamic}
Mode Global Config
Format no mvr mode
Mode Global Config
Default 5
Format mvr querytime <1-100>
Mode Global Config
Format no mvr querytime
Mode Global Config
To Next Page
Loading...
Need help?
General
