NETGEAR M4100 Series ProSAFE User Manual

Utility Commands
381
M4100 Series ProSAFE Managed Switches
show sntp server
This command is used to display SNTP server settings and configured servers.
For each configured server, the information that is shown in the following table is displayed.
Port SNTP Client Port.
Client Mode Configured SNTP Client Mode.
Format show sntp server
Mode Privileged EXEC
Term Definition
Server Host
Address
IP address or hostname of configured SNTP Server.
Server Type Address Type of Server.
Server Stratum Claimed stratum of the server for the last received valid packet.
Server
Reference ID
Reference clock identifier of the server for the last received valid packet.
Server Mode SNTP Server mode.
Server Maximum
Entries
Total number of SNTP Servers allowed.
Server Current
Entries
Total number of SNTP configured.
Term Definition
Host Address IP address or hostname of configured SNTP Server.
Address Type Address Type of configured SNTP server.
Priority IP priority type of the configured server.
Version SNTP Version number of the server. The protocol version used to query the server in
unicast mode.
Port Server Port Number.
Last Attempt
Time
Last server attempt time for the specified server.
Last Update
Status
Last server attempt status for the server.
Term Definition

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)