NETGEAR M4100 Series ProSAFE User Manual

Utility Commands
404
M4100 Series ProSAFE Managed Switches
no debug auto-voip
Use this command to disable Auto VoIP debug messages.
debug clear
This command disables all previously enabled debug traces.
debug console
This command enables the display of debug trace output on the login session in which it is
executed. Debug console display must be enabled in order to view any trace output. The
output of debug trace commands will appear on all login sessions for which debug console
has been enabled. The configuration of this command remains in effect for the life of the login
session. The effect of this command is not persistent across resets.
no debug console
This command disables the display of “debug” trace output on the login session in which it is
executed.
debug crashlog
Use this command to view information contained in the crash log file that the system
maintains when it experiences an unexpected reset. The crash log file contains the following
information:
• Call stack information in both primitive and verbose forms
• Log Status
• Buffered logging
Format no debug auto-voip
Mode Privileged EXEC
Default disabled
Format debug clear
Mode Privileged EXEC
Default disabled
Format debug console
Mode Privileged EXEC
Format no debug console
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)