NETGEAR M4100 Series ProSAFE

Utility Commands
335
M4100 Series ProSAFE Managed Switches
show interface
This command displays a summary of statistics for a specific interface or a count of all CPU
traffic based upon the argument.
If the argument is <slot/port> or lag, the display parameters are as shown in the
following table.
Term Definition
Switch
Description
Text used to identify the product name of this switch.
Machine Type The machine model as defined by the Vital Product Data.
Machine Model The machine model as defined by the Vital Product Data
Serial Number The unique box serial number for this switch.
FRU Number The field replaceable unit number.
Manufacturer Manufacturer descriptor field.
Burned in MAC
Address
Universally assigned network address.
Software Version The release.version.revision number of the code currently running on the switch.
Additional
Packages
The additional packages incorporated into this system.
Format show interface {<slot/port> | switchport | lag <lag-intf-num>}
Mode Privileged EXEC
Parameters Definition
Packets
Received
Without Error
The total number of packets (including broadcast packets and multicast packets)
received by the processor.
Packets
Received With
Error
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
Broadcast
Packets
Received
The total number of packets received that were directed to the broadcast address. Note
that this does not include multicast packets.
Packets
Transmitted
Without Error
The total number of packets transmitted out of the interface.
Transmit
Packets Errors
The number of outbound packets that could not be transmitted because of errors.