NETGEAR M4100 Series ProSAFE User Manual

Quality of Service Commands
313
M4100 Series ProSAFE Managed Switches
auto-voip oui
This command is used to configure an OUI for Auto VoIP. The traffic from the configured OUI
will get the highest priority over the other traffic.
no auto-voip oui
This command is to delete already configured OUI.
auto-voip vlan
This command is used to configure the global auto VoIP VLAN ID. The VLAN behavior
depends on the configured auto VoIP mode.
no auto-voip vlan
This command is used to remove the configured auto VoIP mode.
auto-voip oui-based priority
This command is used to configure the global OUI based auto VoIP priority. If the phone OUI
is matches one of the configured OUI, the priority of traffic from the phone is changed to OUI
priority configured through this command.
Default A list of known OUIs is present
Format auto-voip oui <oui-prefix> oui-desc <string>
Mode Global Config
Format no auto-voip oui <oui-prefix>
Mode Global Config
Default None
Format auto-voip vlan <vlan-id>
Mode Global Config
Format no auto-voip vlan
Mode Global Config
Default Highest available priority
Format auto-voip oui-based priority <priority-value>
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)