Utility Commands
394
M4100 Series ProSAFE Managed Switches
For Message Received, the fields that are shown in the following table are displayed.
For Message Sent, the fields that are shown in the following table are displayed.
show ip dhcp conflict
This command displays address conflicts logged by the DHCP Server. If no IP address is
specified, all the conflicting addresses are displayed.
• Privileged EXEC
• User EXEC
Field Definition
Automatic
Bindings
The number of IP addresses that have been automatically mapped to the MAC
addresses of hosts that are found in the DHCP database.
Expired Bindings The number of expired leases.
Malformed
Bindings
The number of truncated or corrupted messages that were received by the DHCP server.
Message Definition
DHCP
DISCOVER
The number of DHCPDISCOVER messages the server has received.
DHCP
REQUEST
The number of DHCPREQUEST messages the server has received.
DHCP DECLINE The number of DHCPDECLINE messages the server has received.
DHCP
RELEASE
The number of DHCPRELEASE messages the server has received.
DHCP INFORM The number of DHCPINFORM messages the server has received.
Message Definition
DHCP OFFER The number of DHCPOFFER messages the server sent.
DHCP ACK The number of DHCPACK messages the server sent.
DHCP NACK The number of DHCPNACK messages the server sent.
Format show ip dhcp conflict [<ip-address>]
Modes
Term Definition
IP address The IP address of the host as recorded on the DHCP server.
Reporting Host
Hardware
Address
The hardware address of the host that reported the conflict.