NETGEAR M4100 Series ProSAFE

Management Commands
484
M4100 Series ProSAFE Managed Switches
no aaa accounting
This command deletes the accounting method list.
accounting (console/Telnet/SSH)
This command applies the accounting method list to a line configuration
(console/Telnet/SSH). Apply this command in Line Config mode.
no accounting (console/Telnet/SSH)
This command is used to remove accounting from a line configuration mode.
ip accounting exec
This command applies user exec accounting list to the line methods HTTP and HTTPs
methods.
Format no aaa accounting {exec | commands} {default | <list-name>}
Mode Global Config
Format accounting {exec | commands} [default | <list-name>]
Mode Line Config
Term Definition
exec Configures accounting for an EXEC session.
commands Configures accounting for each command execution attempt.
Note: If a user is enabling accounting for exec mode for the current type of line
configuration, they are logged out.
default The default list of methods for authorization services.
<list-name> Alphanumeric character string used to name the list of authorization methods.
Format no accounting {exec | commands}
Mode Line Config
Format ip {http | https} accounting exec {default | <list-name>}
Mode Global Config
Term Definition
{http | https} Line method for which the list needs to be applied.