NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
29
M4100 Series ProSAFE Managed Switches
spanning-tree bpduflood
Use this command to enable BPDU Flood on the interface.
no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
spanning-tree bpduguard
Use this command to enable BPDU Guard on the switch.
no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple
spanning tree (MSTP) BPDUs. Use the <slot/port> parameter to transmit a BPDU from
a specified interface, or use the all keyword to transmit BPDUs from all interfaces. This
command forces the BPDU transmission when you execute it, so the command does not
change the system configuration or have a “no” version.
Default disabled
Format spanning-tree bpduflood
Mode Interface Config
Format no spanning-tree bpduflood
Mode Interface Config
Default disabled
Format spanning-tree bpduguard
Mode Global Config
Format no spanning-tree bpduguard
Mode Global Config
Format spanning-tree bpdumigrationcheck {<slot/port> | all}
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)