NETGEAR M4100 Series ProSAFE User Manual

Management Commands
466
M4100 Series ProSAFE Managed Switches
ip http secure-port
Use this command to set the SSL port where port can be 1-65535 and the default is port 443.
no ip http secure-port
Use this command to reset the SSL port to the default value.
ip http secure-protocol
Use this command to set protocol levels (versions). The protocol level can be set to TLS1,
SSL3 or to both TLS1 and SSL3.
show ip http
Use this command to display the http settings for the switch.
Default 443
Format ip http secure-port <portid>
Mode Privileged EXEC
Format no ip http secure-port
Mode Privileged EXEC
Default SSL3 and TLS1
Format ip http secure-protocol [SSL3] [TLS1]
Mode Privileged EXEC
Format show ip http
Mode Privileged EXEC
Term Definition
HTTP Mode (Unsecure) The unsecure HTTP server administrative mode.
Java Mode The java applet administrative mode which applies to both secure and
unsecure web connections.
Maximum Allowable HTTP
Sessions
The number of allowable unsecure http sessions.
HTTP Session Hard
Timeout
The hard time-out for unsecure http sessions in hours.
HTTP Session Soft Timeout The soft time-out for unsecure http sessions in minutes.
HTTP Mode (Secure) The secure HTTP server administrative mode.

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)