Utility Commands
433
M4100 Series ProSAFE Managed Switches
- Group 2 - High Capacity Alarm Capabilities Group
Describes the high capacity alarm capabilities provided by the agent.
- Group 3 - High Capacity Alarm Notifications Group
Provides new rising and falling threshold notifications for high capacity objects.
rmon alarm
This command sets the RMON alarm entry in the RMON alarm MIB group.
no rmon alarm
This command deletes the RMON alarm entry.
Format rmon alarm <alarm-number> <variable> <sample-interval>
<sampling-type> {rising-threshold <value>} {falling-threshold
<value>} [startup {rising | falling | rising-falling}] [owner
<string>]
Mode Global Config
Parameter Description
<alarm-number> The alarm number that identifies the alarm.
<variable> The object identifier of the particular variable to be sampled. Only
variables that resolve to an ASN.1 primitive type of integer.
<sample-interval> The interval in seconds over which the data is sampled and compared
with the rising and falling thresholds. The range is 0 to 2147483647.
The default is 0.
<sampling-type> The alarm sample type. The method of sampling the selected variable
and calculating the value to be compared against thresholds. Possible
types are Absolute or Delta.
rising-threshold <value> The alarm rising threshold for the sample statistics.
falling-threshold <value> The alarm falling threshold for the sample statistics.
[startup {rising | falling
| rising-falling}]
The alarm that may be sent. Possible values are Rising Alarm, Falling
Alarm, or both.
owner <string> The alarm owner. The owner string associated with the alarm entry.
Format no rmon alarm <alarm number>
Mode Global Config
To Next Page
Loading...
Need help?
General
