NETGEAR M4100 Series ProSAFE User Manual

Utility Commands
380
M4100 Series ProSAFE Managed Switches
no clock summer-time
Use this command to reset the summertime offset.
Command example:
(NETGEAR Switch)(config)#no clock summer-time
show sntp
This command is used to display SNTP settings and status.
show sntp client
This command is used to display SNTP client settings.
Format no clock summer-time
Mode Global Config
Format show sntp
Mode Privileged EXEC
Term Definition
Last Update
Time
Time of last clock update.
Last Unicast
Attempt Time
Time of last transmit query (in unicast mode).
Last Attempt
Status
Status of the last SNTP request (in unicast mode) or unsolicited message (in broadcast
mode).
Broadcast Count Current number of unsolicited broadcast messages that have been received and
processed by the SNTP client since last reboot.
Multicast Count Current number of unsolicited multicast messages that have been received and
processed by the SNTP client since last reboot.
Format show sntp client
Mode Privileged EXEC
Term Definition
Client Supported
Modes
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports.

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)