NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
51
M4100 Series ProSAFE Managed Switches
no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface
are admitted and forwarded to ports that are members of that VLAN.
vlan port pvid all
This command changes the VLAN ID for all interface.
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to enabled. If
tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If
tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format no vlan port ingressfilter all
Mode Global Config
Default 1
Format vlan port pvid all <1-4093>
Mode Global Config
Format no vlan port pvid all
Mode Global Config
Format vlan port tagging all <1-4093>
Mode Global Config
Format
no vlan port tagging all
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)