NETGEAR M4100 Series ProSAFE

Utility Commands
398
M4100 Series ProSAFE Managed Switches
no ip domain retry
Use this command to return to the default.
ip domain timeout
Use this command to specify the amount of time to wait for a response to a DNS query. The
<seconds> parameter specifies the time in seconds to wait for a response to a DNS query
and ranges from 0 to 3600.
no ip domain timeout
Use this command to return to the default setting.
clear host
Use this command to delete entries from the host name-to-address cache. This command
clears the entries from the DNS cache maintained by the software. This command clears
both IPv4 and IPv6 entries.
Format no ip domain retry <number>
Mode Global Config
Default 3
Format ip domain timeout <seconds>
Mode Global Config
Format no ip domain timeout
Mode Global Config
Format clear host {<name> | all}
Mode Privileged EXEC
Field Description
name A particular host entry to remove. <name> ranges from 1-255 characters.
all Removes all entries.