NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
87
M4100 Series ProSAFE Managed Switches
dot1x user
This command adds the specified user to the list of users with access to the specified port or
all ports. The <user> parameter must be a configured user.
no dot1x user
This command removes the user from the list of users with access to the specified port or all
ports.
clear dot1x authentication-history
This command clears the authentication history table captured during successful and
unsuccessful authentication on all interface or the specified interface.
dot1x dynamic-vlan enable
Use this command to enable the switch to create VLANs dynamically when a RADIUS
assigned VLAN does not exist in the switch.
no dot1x dynamic-vlan enable
Use this command to disable the switch from creating VLANs dynamically when a RADIUS
assigned VLAN does not exist in the switch.
Format dot1x user <user> {<slot/port> | all}
Mode Global Config
Format no dot1x user <user> {<slot/port> | all}
Mode Global Config
Format clear dot1x authentication-history [slot/port]
Mode Global Config
Format dot1x dynamic-vlan enable
Mode Global Config
Default Disabled
Format no dot1x dynamic-vlan enable
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)