NETGEAR M4100 Series ProSAFE User Manual

Management Commands
456
M4100 Series ProSAFE Managed Switches
show telnet
Use this command to display the current outbound Telnet settings. In other words, these
settings apply to Telnet connections initiated from the switch to a remote system.
• Privileged EXEC
• User EXEC
show telnetcon
Use this command to display the current inbound Telnet settings. In other words, these
settings apply to Telnet connections initiated from a remote system to the switch.
• Privileged EXEC
• User EXEC
Format show telnet
Modes
Term Definition
Outbound Telnet
Login Timeout
The number of minutes an outbound Telnet session is allowed to remain inactive before
being logged off.
Maximum
Number of
Outbound Telnet
Sessions
The number of simultaneous outbound Telnet connections allowed.
Allow New
Outbound Telnet
Sessions
Indicates whether outbound Telnet sessions will be allowed.
Format show telnetcon
Modes
Term Definition
Remote
Connection
Login Timeout
(minutes)
This object indicates the number of minutes a remote connection session is allowed to
remain inactive before being logged off. Might be specified as a number from 1 to 160.
The factory default is 5.
Maximum
Number of
Remote
Connection
Sessions
This object indicates the number of simultaneous remote connection sessions allowed.
The factory default is 5.
Allow New Telnet
Sessions
New Telnet sessions will not be allowed when this field is set to no. The factory default
value is yes.

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)